PID sensor gas detector
-500x500.jpg)
The working principle of the PID sensor gas detector is as follows: First, a UV lamp is used to generate high-energy UV radiation, which can penetrate the gas and enter the sensor. When high-energy UV radiation interacts with a gas, it triggers the ionization of gas molecules. The movement of positive and negative ions, free electrons, and photons in the sensor allows the ionization current to be measured. The higher the gas concentration, the greater the ionization current value. By measuring changes in ionization current, the concentration of the target gas can be accurately determined.
PID sensor gas detector maintenance
1. Regular calibration: The accuracy and stability of the gas detector are the key to ensuring work performance. Calibrating your gas detector regularly will maintain its accuracy and increase its lifespan.
2. Clean the sensor: Since the sensor is the core component of the gas detector, cleaning the sensor is crucial to the normal operation of the instrument. When cleaning the sensor, use a clean soft cloth to gently wipe the sensor surface and avoid using sharp objects or chemicals for cleaning.
3. Protective cover: Gas detectors are usually equipped with protective covers to protect sensors and other parts of the instrument. When using gas detectors, ensure that the protective cover is intact and cleaned and replaced regularly.
4. Check the gas source: The gas detector requires a stable gas supply, so the pressure and purity of the gas source need to be checked regularly. Make sure the gas detector is working properly and accurately detects gas concentration.
5. Keep the instrument dry: Avoid prolonged contact of the gas detector with water or an environment with excessive humidity, which may cause the instrument to become damp or damaged.
6. Storage and transportation: When storing and transporting the gas detector, shock, vibration and high temperature should be avoided. At the same time, attention should be paid to the installation and protection of the protective cover to prevent the instrument from being damaged.
7. Regular maintenance: Regular maintenance is an important part of maintaining the stable operation of the gas detector. Through regular inspection, maintenance and repair, potential problems can be discovered and solved in time, and the service life of the equipment can be extended.
In short, understanding the working principle and maintenance knowledge of PID sensor gas detector is crucial to ensure its normal operation and accuracy. Only by doing a good job in maintenance of the detector can it fully exert its due performance and ensure the safety and health of the working environment.
Air temperature and humidity sensor
Air temperature and humidity sensor is a sensor that can detect air temperature and humidity. It has the characteristics of small size, low power consumption and low cost, and is widely used in homes, offices, factories and other places.
Carbon monoxide detector for garage
The Carbon monoxide detector for garage monitors the concentration of carbon monoxide through the built-in carbon monoxide sensor. When the carbon monoxide concentration reaches the preset value, Sound and light alarm will sound.
-450x320.jpg)
Application of 4 gas sensor in indoor air purification
The 4 gas sensor, also called an all-in-one air quality sensor, is an instrument that can detect the concentration of multiple air pollutants at the same time, including PM2.5, TVOC, CO2, formaldehyde, etc.
Atmospheric monitoring Environmental governance
Atmospheric monitoring technology is an important means of air pollution control, which can help people monitor and control environmental pollution in a timely manner and protect the atmospheric environment.
-450x320.jpg)
Application of All-in-one sensor
All-in-one sensor is a sensor that can detect multiple gases at the same time. It consists of multiple sensing elements, each sensing element is responsible for detecting a gas.